Joint-It Simple Neutral 20Kg (20-AW-N) Paving Jointing Mortar
Weed Resistant Natural Sand for Brick Paving
For joints less than 3mm wide
Available in 2 colours: Neutral and Grey
Storage
Store product, including open bags, in a dry place. Product does not cure/harden on contact with air. Product will be adversely affected by storage in damp conditions.
Benefits
- Ready-to-use
- Quick, sweep-in application
- Weed Resistant
- Frost Resistant
- Non-polymer 100% Natural Raw Materials
- Non-Hazardous
- Non-Staining
- Water Permeable
- Certified Environmentally Friendly
Surface Preparation
Ensure that surface is clean and dry before opening the bag.
You will need a compactor/wacker plate and a leaf blower to complete the application of Joint-It® Fine.
Coverage
Each bag of Joint-It Fine will cover approximately 10m² of brick/block paving where the joints are less than 3mm wide.
Find out exactly how much Joint-It Fine you will need by using our calculator.
Precautions For Use
Always test a small hidden portion of the surface before use to ensure appearance and performance is acceptable. Suitable for lightly loaded surfaces (up to 3.5 tonnes).
Joint-It Fine should be applied in dry weather conditions at temperatures above 2°C.
Joint-It Fine should only be used with block/brick paving laid on a water-permeable base with joints under 3mm wide.
Application Instructions
Sweep sand into clean and dry joints.
Compact sand into joints using a vibrator / whacker plate.
Use a leaf blower to remove excess sand from the top of the surface.
Wet paving with a light, fine spray and wait 5-10 minutes. Then thoroughly soak the paving.
MORE INFO: https://jointit.com/products/joint-it-fine/
PRODUCT CALCULATOR: https://jointit.com/product-calculator/
Original: $58.73
-65%$58.73
$20.56Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Weed Resistant Natural Sand for Brick Paving
For joints less than 3mm wide
Available in 2 colours: Neutral and Grey
Storage
Store product, including open bags, in a dry place. Product does not cure/harden on contact with air. Product will be adversely affected by storage in damp conditions.
Benefits
- Ready-to-use
- Quick, sweep-in application
- Weed Resistant
- Frost Resistant
- Non-polymer 100% Natural Raw Materials
- Non-Hazardous
- Non-Staining
- Water Permeable
- Certified Environmentally Friendly
Surface Preparation
Ensure that surface is clean and dry before opening the bag.
You will need a compactor/wacker plate and a leaf blower to complete the application of Joint-It® Fine.
Coverage
Each bag of Joint-It Fine will cover approximately 10m² of brick/block paving where the joints are less than 3mm wide.
Find out exactly how much Joint-It Fine you will need by using our calculator.
Precautions For Use
Always test a small hidden portion of the surface before use to ensure appearance and performance is acceptable. Suitable for lightly loaded surfaces (up to 3.5 tonnes).
Joint-It Fine should be applied in dry weather conditions at temperatures above 2°C.
Joint-It Fine should only be used with block/brick paving laid on a water-permeable base with joints under 3mm wide.
Application Instructions
Sweep sand into clean and dry joints.
Compact sand into joints using a vibrator / whacker plate.
Use a leaf blower to remove excess sand from the top of the surface.
Wet paving with a light, fine spray and wait 5-10 minutes. Then thoroughly soak the paving.
MORE INFO: https://jointit.com/products/joint-it-fine/
PRODUCT CALCULATOR: https://jointit.com/product-calculator/
